FloGard MS6201
- Mild steel corrosion inhibitor for once-thorough and recirculating cooling systems
- Effective iron, manganese and calcium chelant for once-through cooling systems
- FDA approved for paper mill supply applications
FloGard MS6201- General Corrosion Inhibitor & Chelant
- Mild steel corrosion inhibitor for once-thorough and recirculating cooling systems
- Effective iron, manganese and calcium chelant for once-through cooling systems
- FDA approved for paper mill supply applications
DESCRIPTION AND USE
FloGard MS6201 is a liquid polyphosphate product designed to inhibit corrosion and deposition in oncethrough and recirculating cooling water systems.
Once-through Systems – At typical use levels, the polyphosphate in FloGard MS6201 combines with calcium and/or zinc to form a barrier film as a cathodic inhibitor.
FloGard MS6201 also functions as a deposit control agent. Uncontrolled deposition in a water system can cause numerous problems including reduced heat transfer, restricted water flow and under-deposit corrosion. FloGard MS6201 effectively controls deposition of iron, manganese and calcium to minimize these operating problems.
Recirculating Cooling Systems – FloGard MS6201 is often used in combination with other corrosion inhibitors to minimize corrosion of mild steel surfaces.
TREATMENT AND FEEDING REQUIREMENTS
Proper treatment levels for FloGard MS6201 depend on many factors, such as the calcium concentration and pH of the water, and other conditions particular to a given installation. This product should be used in accordance with control procedures GE Betz establishes for a specific application.
FloGard MS6201 may be fed directly from the shipping container or diluted to a convenient strength. For best results, this product should be fed continuously.
A photometric procedure can be used to monitor the total inorganic phosphate level in the treated water.
GENERAL PROPERTIES
Physical properties of FloGard MS6201 are shown on the Material Safety Data Sheet, a copy of which is available upon request.
PACKAGING INFORMATION
FloGard MS6201 is a liquid blend, supplied in 55 gallon (208-liter), bung-type, nonreturnable steel drums. In addition, it is also available under the GE Betz Semi-Bulk ControlTM and Point Of FeedTM Service Programs for contracted quantities in certain geographic areas.
STORAGE
Protect from freezing. If this product is frozen during shipment or storage, slight mixing may be required to insure homogeneity.
SAFETY PRECAUTIONS
A Material Safety Data Sheet containing detailed information about this product is available upon request.
