Spectrus NX102
Spectrus NX102 is a microbial control agent approved for use in a variety of commercial and industrial water-based systems. Spectrus NX102 contains 5% of the active ingredient, 2,2-dibromo-3-nitrilopropion-amide (DBNPA). This product is most effective as a bactericide, but will also control fungi and algae when used at higher dosages.
Spectrus NX102 - Microbiological Control Agent
- Potent, rapid acting antimicrobial
- Organo-bromine based
- Produces a total halogen residual
- Fast acting and non-foaming
- Minimal environmental impact
- Approved for non-potable RO units
- FDA approved (CFR 176.300)
- USDA approved (G-5, G-7)
DESCRIPTION AND USE
Spectrus NX102 is a microbial control agent approved for use in a variety of commercial and industrial water-based systems. Spectrus NX102 contains 5% of the active ingredient, 2,2-dibromo-3-nitrilopropion-amide (DBNPA). This product is most effective as a bactericide, but will also control fungi and algae when used at higher dosages.
Spectrus NX102 aids in the control of bacterial, fungal, and algal slimes in evaporative condensers, heat exchange water systems, commercial and industrial cooling towers, influent systems, industrial water scrubbing systems, and brewery pasteurizers. It is also registered for use in once-through and closed cycle systems, as well as industrial air washer systems equipped with mist eliminators. Spectrus NX102 can also be used to control microbial fouling of nonpotable reverse osmosis equipment and in water containing metal cutting fluids.
Control of microbiological populations in industrial water systems is essential to prevent biofouling. In cooling systems, biofouling of heat exchange equipment and tower fill reduces heat transfer efficiency turnarounds, leading to lost production. Biofouling can also damage equipment through microbiologically influenced corrosion (MIC). As a result of these effects, biofouling must be prevented in order for operating units to achieve profitability goals. Alternating feed of Spectrus NX102 with another microbiological control agent (e.g., a Spectrus NX biocide product or a Spectrus BD biodispersant) will provide better control by enhancing biocide penetration of biofilms, by reducing selection of resistant organisms and by aiding cleanup of biofouled surfaces.
ENVIRONMENTAL CONSIDERATIONS
Spectrus NX102 acts rapidly to control microorganisms, then naturally hydrolyzes to compounds of much lower toxicity. Both high pH and high temperature speed this natural detoxifying process.
TREATMENT AND FEEDING REQUIREMENTS
Spectrus NX102 may be fed continuously or shot-fed to the system. Correct treatment levels and frequency of Spectrus NX102 addition depend on many factors.
These include, but are not limited to, system cleanliness, types of microbes, nutrient concentrations, temperature, pH, retention time, and other system operating characteristics. Consult the product label for general dosage guidelines. Microbiological monitoring is recommended to evaluate product requirements.Consult your GE Betz representative for technical advice on your specific application. In all cases, this product must be applied in accordance with use instructions on the Spectrus NX102 label. Feed Point- Apply Spectrus NX102 to a point in the system where turbulence and flow patterns assure good mixing with the water being treated.
Dilution- This blended product is best fed neat (undiluted) from the storage container.
Compatible materials- Spectrus NX102 is compatible with most plastics, ceramic, and Teflon® lines and feed equipment, as well as equipment lined with these materials. Typical materials for use include polyethylene, polypropylene and Viton.
Avoid: mild steel, 304, 316, and 316L Stainless Steel, Hastalloy 825, Carpenter 20, Nickel 200, aluminum, copper, and brass, fiberglass reinforced plastic and Hypalon.
GENERAL PROPERTIES
Physical properties of Spectrus NX102 are shown on the Material Safety Data Sheet, a copy of which is available on request.
PACKAGING INFORMATION
Spectrus NX102 is a liquid blend available in a wide variety of containers and delivery methods, including GE Betz’s ChemSure® Drumless Delivery Services. Contact your GE Betz representative for details.
STORAGE
Protect from extreme temperatures. Store Spectrus NX102 at temperatures between 40°F (4°C) and 100°F (38°C).
SAFETY PRECAUTIONS
Use of eye protection (goggles and face shield) and gauntlet-type gloves is required when handling this product. See Section 8 of the MSDS for additional information on recommended personal protective equipment.
