Inhibitor OP8410
Inhibitor OP8410 is a liquid, phosphate-containing product designed to enhance corrosion protection in mill supply water systems, once through cooling systems and open recirculating systems. This product contains phosphate to develop the optimal inhibitor level cost effectively. This product can be fed at a variety of feed rates depending on the application and the water chemistry. The phosphate film formed inthese programs provides excellent protection for mild steel.
Inhibitor OP8410- Corrosion Inhibitor
- Mild steel corrosion inhibitor
- Excellent phosphate source for treatments
DESCRIPTION AND USE
Inhibitor OP8410 is a liquid, phosphate-containing product designed to enhance corrosion protection in mill supply water systems, once through cooling systems and open recirculating systems. This product contains phosphate to develop the optimal inhibitor level cost effectively. This product can be fed at a variety of feed rates depending on the application and the water chemistry. The phosphate film formed inthese programs provides excellent protection for mild steel.
TREATMENT AND FEEDING REQUIREMENTS
Dosage – The optimal dosage of Inhibitor OP8410 is a function of the corrosivity of the water to be treated, application conditions and the specific application. For best performance, this product should be fed continuously. While the typical dosage is 6 to 20 ppm (mg/L) for an once-through application, this product is to be used in accordance with control procedures that GE Betz establishes for a specific application. This product is also extensively used as a phosphate source for programs like Dianodic III and Continuum AEC technologies.
Dilution – Inhibitor OP8410 may be fed directly from the shipping container or diluted to any convenientstrength.
Feed Equipment – Tanks, pumps, piping, and valves should be made of 316 stainless steel and mild steel or most common plastics. Avoid the use of mild steel and copper alloys.
Monitoring – A photometric procedure can be used to monitor the orthosphosphate concentration in the treated water.
GENERAL PROPERTIES
Physical properties of Inhibitor OP8410 are shown on the Material Safety Data Sheet, a copy of which is available upon request.
PACKAGING INFORMATION
Inhibitor OP8410 is a liquid blend, supplied in 55-gallon (208-liter), bung-type, nonreturnable steel drums. In addition, it is also available under the GE Betz Semi-Bulk Control and Point of Feed Delivery Programs for contracted quantities in certain geographic areas.
STORAGE
Protect from freezing. If this product is frozen during shipment or storage, slight mixing may be required to ensure homogeneity.
SAFETY PRECAUTIONS
A Material Safety Data Sheet containing detailed information about this product is available upon request.
