Inhibitor AZ8101 

• Inhibits corrosion of copper, admiralty brass, and other copper alloys
• Compatible with other treatment programs
• Works well at chelating copper 

DESCRIPTION AND USE

Inhibitor AZ8101 is a specially formulated corrosion inhibitor which is designed to establish a protective film on copper and copper-alloy heat exchange sur-faces. Inhibitor AZ8101 effectively inhibits the corrosion of copper alloy surfaces. Indirectlly, it also reduces the corrosion of steel surfaces within a given cooling system if the steel corrosion is a result of a galvanic reaction between the steel surface and the products of copper corrosion which have been deposited on the steel.

TREATMENT AND FEEDING REQUIREMENTS

Dosage – Proper treatment levels of Inhibitor AZ8101 depend on many factors, such as the corrosion load and conditions particular to a given installation. This product is to be used in accordance with control procedures GE Betz establishes for a specific application.

Dilution – Inhibitor AZ8101 should be fed directly from the shipping container.

Feed Equipment – Mild steel tanks, pumps, and pip-ing are satisfactory for use with this product. 

GENERAL PROPERTIES

Physical properties of Inhibitor AZ8101 are shown on the Material Safety Data Sheet, a copy of which is available upon request.

PACKAGING INFORMATION 

Inhibitor AZ8101 is a liquid blend, supplied in 55-gallon (208-liter), bung-type, nonreturnable steel drums. In addition,Inhibitor AZ8101 is also available under the GE Betz Semi-Bulk Control and Point Of Feed service programs for contracted quantities in certain geographic areas.

STORAGE

Protect from freezing. If this product is frozen during shipment or storage, slight mixing may be required to insure homogeneity. 

SAFETY PRECAUTIONS 

A Material Safety Data Sheet containing detailed information about this product is available upon request.