Hypersperse MDC150 

• Compatible with SoliSep MPT150 coagulant.
• Classified for use in producing potable water.(Classified to ANSI/NSF Standard 60).
• Effectively controls scales including calcium carbonate up to LSI +3.0, calcium sulfate, barium sulfate, and strontium sulfate.
• Compatible with all of the leading RO membranes.
• Maintains cleaner membrane surfaces by dispersing particulate foulants.
• Effective over a wide pH range.
• May be fed neat or diluted.
• Compatible with feedwaters that contain aluminum and iron oxides.

DESCRIPTION AND USE

Hypersperse MDC150 is a highly effective liquid antiscalant/antifoulant developed to control scale pre-cipitates and reduce particulate fouling within mem-brane separation systems. This highly effective liquid antiscalant/antifoulant is formulated specifically to be used with SoliSep MPT150 coagulant. It is impera-tive that the coagulants used are compatible with the antiscalant/antifoulant being injected as incompatible chemicals may cause membrane fouling.
PACKAGING INFORMATION

Hypersperse MDC150 is a liquid material, available in a wide variety of customized containers and delivery methods.
Contact your GE Betz sales representative for details.

APPLICATION

For maximum effectiveness, Hypersperse MDC150 should be added prior to the static mixer or cartridge filter housing.

For potable applications the maximum dosage is 10 mg/L. Maximum dilution is 10% with RO permeate or DI water.

DOSING

Typical dosage range is between 3 and 6 mg/L.

Important Note: Over and under-dosing may cause membrane fouling so please contact  your local GE Betz representative  to define the optimal feedpoint and dosage rate.

Maximum Dilutions

Maximum dilution is temperature related as shown below.

SAFETY PRECAUTIONS

A Material Safety Data Sheet containing detailed information about this product is available upon request.