Foam dust suppressant used for mine

Foam dust suppressant used for mine
Foam dust suppressant used for mine is suitable for the prevention and control of dust disaster in narrow space such as underground mining face, belt conveyor transfer point and tunnel excavation construction.
- +86 15306313650
- dls@bimuss.com
Foam dust suppressant used for mine description
Application principle
The technology of dust collecting by foam dust collector has been widely applied in coal mining. It uses dust removal water pipes and pressure air pipes to mix with water through a certain proportion. Through special foaming device, the high pressure multiple foam is generated by introducing the pressure air, and is sprayed to the dust source through the nozzle. Foam acts on dust through good covering, wetting and adhesion, and fundamentally prevents dust dispersion and effectively reduces dust concentration in the air. Compared with other wet dust suppression methods, the water consumption of the technology is reduced by 50 to 80%, and the dust removal efficiency is increased by more than 3 times than that of spraying water.
Technical characteristics of foam dust traps
- foam can cover the digging drum of the fully mechanized excavator without air gap, so that the cutting can be completed in the foam body and fundamentally prevent the dust from spreading outwards.
- the total volume and total surface area of the liquid increase greatly after forming the foam, which increases the collision probability with the dust and increases the dust removal efficiency.
- The liquid membrane of the 3. foam contains special dust catching agent, which can greatly reduce the surface tension of water and rapidly increase the wetting speed of the dust.
- foam has good viscosity. Dust and foam will be quickly adhered to foam after contact.
- for high gas mines, the foam covered cutting cylinder can effectively inhibit the spark generated by cutting and prevent gas and coal dust explosions.
- The water consumption is small, which avoids the subsidence of the fully mechanized excavator caused by the large water consumption of water mist dust removal, and improves the working efficiency;
- the foam dust capture agent can also play a certain lubricating and cooling effect on the mining face, which has a certain protective effect on the mining equipment.
- The main equipment is fixed with strong magnet, which is convenient for installation, disassembly and maintenance.
Performance characteristics of foam dust traps.
- Water soluble products, environmentally friendly, non-toxic and harmless, do not cause secondary pollution to the environment;
- High efficiency concentrated preparation, low concentration, remarkable dust suppression effect and long-term maintenance;
- High polymer products, long-term use of the equipment without corrosion and cleaning after use;
- It is easy to operate, easy to dissolve in water, low viscosity, efficient atomization and even spray;
- The concentration can be as low as 0.5-1% with low dosage;
- Because the components of the product are mainly organic compounds, there is no adverse effect on the environment.
Product application scope
It is suitable for the prevention and control of dust disaster in narrow space such as underground mining face, belt conveyor transfer point and tunnel excavation construction.
- Dust from coal mining face. The main dust production processes of coal mining face include coal falling, coal loading, coal transportation, hydraulic support moving, transportation and transfer, manual coal crushing, blasting and coal caving at coal caving hole.
- Dust production in working face. The dust production process of heading face mainly includes mechanical rock breaking (coal), loading, blasting, coal transportation and transfer, bolt shotcreting, etc.
- Dust production in other places. High concentration of mine dust is also produced in the bolting and shotcreting site of roadway maintenance and coal loading and unloading point, especially the instantaneous mine dust concentration at the coal loading and unloading place, sometimes even reaching the limit of coal dust explosion concentration, which is very dangerous.
- Other applications
Coal and mineral mining, transportation, loading and unloading, stacking; open-air quarry; gravel plant; quarry; building demolition, civil construction and surrounding roads, along the road under construction, gathering and transportation station, storage and transportation station, coal storage yard, slag yard; coal mine, mine, port, wharf, power plant, sludge plant, iron and steel plant, coking plant, coal washing plant, smelting plant, metallurgical plant, dust workshop, etc The area and place of dust.
BIMUSS Chemical produces and sells water treatment chemicals. Please refer to our water treatment chemical catalog and contact your service representative if needed.
BIMUSS Water treatment chemical:
RO antiscalant 丨 RO cleaner 丨 Biocide 丨 Flocculant 丨 PAM 丨 PAC 丨 Scale inhibitor 丨 Corrosion inhibitor 丨 Defoamer 丨 Decolorant 丨 Deodorant 丨 Oxygen scavenger 丨 Seawater desalination chemicals丨 Heavy metal removal丨 Isothiazolinone丨 Ion exchange resin丨 SDIC丨 TCCA丨 Activated carbon