FloGard POT6102
- Mild steel corrosion inhibitor for once-through and recirculating cooling systems
- Effective iron and calcium dispersant for oncethrough cooling systems
- Helps to control red water problems
- Acceptable for potable water use
FloGard POT6102- Potable Water Treatment
- Mild steel corrosion inhibitor for once-through and recirculating cooling systems
- Effective iron and calcium dispersant for oncethrough cooling systems
- Helps to control red water problems
- Acceptable for potable water use
DESCRIPTION AND USE
FloGard POT6102 is a liquid polyphosphate product designed to inhibit the corrosion and deposition in once-through and recirculating cooling water systems.
At typical use levels, the polyphosphate in FloGard POT6102 combines with calcium and/or zinc to form a barrier film at the corrosion cell. This is the primary mode of corrosion protection.
FloGard POT6102 also functions as a deposit control agent. Uncontrolled deposition in a water system can cause numerous problems including reduced heat transfer, restricted water flow and under-deposit corrosion. FloGard POT6102 effectively controls deposition of iron, manganese and calcium to minimize these operating problems. The product has also been found to help control unsightly red water problems.
The ingredients in FloGard POT6102 meet NSF Standard 60 which was adopted by the American National Standards Institute (ANSI). The National Sanitation Foundation (NSF) has certified that this product conforms to all applicable requirements of this standard.
TREATMENT AND FEEDING REQUIREMENTS
Proper treatment levels for FloGard POT6102 depend on many factors, such as the calcium concentration and pH of the water, and other conditions particular to a given installation. For best performance, this product should be used in accordance with control procedures that GE Betz establishes for a specific application.
FloGard POT6102 may be fed directly from the shipping container or diluted to any convenient strength. For best results, this product should be fed continuously.
GENERAL PROPERTIES
Physical properties of FloGard POT6102 are shown on the Material Safety Data Sheet, a copy of which is available upon request.
PACKAGING INFORMATION
FloGard POT6102 is a liquid blend available in a wide variety of customized containers and delivery methods. Contact your GE Betz representative for details.
STORAGE
Protect from freezing. If this product is frozen during shipment or storage, slight mixing may be required to ensure homogeneity.
SAFETY PRECAUTIONS
A Material Safety Data Sheet containing detailed information about this product is available upon request.
PRICING
F.O.B. Destination. Minimum freight allowed.
