CorrShield MD4100

• Effective for steel, copper and mixed metallurgy systems
• Stable and effective at high temperature and heat fluxes
• Compatible with glycol and alcohol antifreeze solutions

DESCRIPTION AND USE

CorrShield MD4100 is a specially formulated molybdate/nitrite-based corrosion inhibitor designed for use in closed cooling systems. It is effective in controlling corrosion over a wide range of conditions.

CorrShield MD4100 has been successfully applied in systems using demineralized, softened, and hard water make-up.

If is proven to be effective in chilled water systems and in pressurized hot water systems.

When applied according to GE Betz recommendations, this product can provide corrosion control results approaching the results obtained by using chromate, but without chromate’s environmental hazard.

TREATMENT AND FEEDING REQUIREMENTS

Typically the closed cooling water should be maintained at a high pH with this inhibitor. Proper treatment levels for CorrShield MD4100 depend on several factors such as the corrosion potential and conditions particular to a given installation. The product

should be used in accordance with control procedures that GE Betz establishes for a specific application.

GENERAL PROPERTIES

Physical properties of CorrShield MD4100 are shown on the Material Safety Data Sheet, a copy of which is available on request.

PACKAGING INFORMATION

CorrShield MD4100 is a liquid blend, available in a wide variety of customized containers and delivery methods. Contact your GE Betz representative for details.

STORAGE

Protect from freezing. If this product is frozen during shipment or storage, slight mixing may be required to ensure homogeneity.

SAFETY PRECAUTIONS

A Material Safety Data Sheet containing detailed information about this product is available upon request.

PRICING

F.O.B. Destination. Minimum freight allowed.