Spectrus NX1106
Spectrus NX1106 is a microbial control agent approved for use in a variety of industrial water-based systems. Spectrus NX1106 contains 1.15% 5-chloro-2-methyl-4-isothiazolin-3-one and 0.35% 2-methyl-4-isothiazolin-3-one. This product is most effective as a bactericide, but will also control fungi and algae when used at higher dosages.
Spectrus NX1106 - Microbiological Control Agent
- Water-based antimicrobial
- FDA approved (CFR 176.170, 180, and 300)
- USDA approved (G-7)
- Approved for sale in California
DESCRIPTION AND USE
Spectrus NX1106 is a microbial control agent approved for use in a variety of industrial water-based systems. Spectrus NX1106 contains 1.15% 5-chloro-2-methyl-4-isothiazolin-3-one and 0.35% 2-methyl-4-isothiazolin-3-one. This product is most effective as a bactericide, but will also control fungi and algae when used at higher dosages.
Spectrus NX1106 aids in the control of bacterial, fungal, and algal slimes in evaporative condensers, heat exchange water systems, commercial and industrial cooling towers, influent systems, industrial water scrubbing systems, brewery pasteurizers, as well as industrial air washer systems equipped with mist eliminators.
Control of microbiological populations in industrial water systems is essential to prevent biofouling. In cooling systems, biofouling of heat exchange equipment and tower fill reduces heat transfer efficiency and can force unscheduled shutdowns and extended turnarounds, leading to lost production. Biofouling can also damage equipment through microbiologically influenced corrosion (MIC). As a result of these effects, biofouling must be prevented in order for operating units to achieve profitability goals.
Alternating feed of Spectrus NX1106 with another microbiological control agent (e.g., a Spectrus NX biocide product or an oxidizing biocide) will provide better long term control by reducing selection of resistant organisms.
TREATMENT AND FEEDING REQUIREMENTS
Spectrus NX1106 is most effective when shot-fed to the system. Correct treatment levels and frequency of Spectrus NX1106 addition depend on many factors. These include, but are not limited to, system cleanliness, types of microbes, nutrient concentrations, temperature, pH, retention time, and other system operating characteristics. Consult the product label for general dosage guidelines. Microbiological monitoring is recommended to evaluate product requirements. Consult your GE Betz representative for technical advice on your specific application. In all cases, this product must be applied in accordance with use instructions on the Spectrus NX1106 label.
Feed Point – Spectrus NX1106 can be fed directly from the drum or diluted with water and fed by any suitable feed system. Spectrus NX1106 should be dosed directly into the sump or basin or other location where good distribution can be assured. In treating air washer systems, Spectrus NX1106 should be added to the air washer sump or chill water sump to ensure uniform mixing.
Compatible Materials – Spectrus NX1106 is compatible with most plastics, fiberglass, ceramic, and Teflon™ feed equipment.
Avoid: 304 and 316 stainless mild steel, copper, and brass lines and equipment.
GENERAL PROPERTIES
Physical properties of Spectrus NX1106 are shown on the Material Safety Data Sheet, a copy of which is available on request.
PACKAGING INFORMATION
Spectrus NX1106 is a liquid blend available in a wide variety of containers and delivery methods, including GE Betz’s ChemSure® Drumless Delivery Services. Contact your GE Betz representative for details.
STORAGE
Protect from extreme temperatures. Store Spectrus NX1106 at temperatures between 40°F (4°C) and 100°F (38°C).
SAFETY PRECAUTIONS
Use of eye protection (goggles and face shield) and gauntlet-type gloves is required when handling this product. See Section 7 of the MSDS for additional information on recommended personal protective equipment.
